Polyair Springs 2WD & 4WD Vehicles

Polyair Springs are engineered for long life. Provided you take a little amount of care when selecting and fitting your kit, maximum results will be obtained.

Whether you are towing or general driving you will find many benefits by fitting either Polyair Leaf Springs or Polyair Coil Springs. Airbags are designed to level the vehicle to the original designed height up to 500kg of load.

Watch this video below and see the difference it makes to these vehicles.

Instructional Video on Polyair Redbag for Coil Springs Installation

Tips for Polyair Coil Springs

Polyair Red Series System 1,000lbs/450kg of load support. Most bags can be fitted between the lowest coil opening when the suspension is fully extended.

Additional clearance between the coil may be obtained by removing lower shock absorber mountings and lowering suspension 30-50mm. Bag should be a reasonable snug fit in the coil, however tolerance of + 6mm is common.

Observe tension on brake hose, DO NOT STRAIN. Ensure that exhaust tail pipe is 60mm from Polyair Bag. If necessary loosen clamps and rotate or move to obtain additional clearance.

General Maintenance Tips

After fitting kits and / or extension leads inflate air bags to 175 KPa / 25 lbs and test for air leaks by applying a liquid soapy solution to all valve cores, fittings and connections.

CAUTION: Do not inflate air springs while vehicle is on frame hoist. Vehicle must be standing on its wheels before bags are inflated.

Tips for Polyair Leaf Springs

Polyair Bellows System – 5,000lbs/2,200kg of load support and a correctly attached chassis bracket has no stress on the attaching screws.

Stands or Jacks should be placed under differential housing so that dimensional relationship between vehicle chassis and leaf springs remains unaffected.

Kits are to be fitted not more than 40mm and not less than 20mm in front of or behind the differentials housing and usually fitting instructions specify the correct location.

Clearance from any obstructions should be a MINIMUM of 20mm (exhaust pipes 60mm at all times).

How Much Do They Cost? Not as Much as You Think!

Express Quote

So we can give you the right advice tell us...

a) What you are looking for
b) The type of vehicle
c) The load you carry

Would you like a price on installation


BlueMax Distributors

If you would like a smoother ride in your vehicle or improve the suspension in your vehicle give us a call 1800 630 411 or fill out the enquiry form.

PLEASE NOTE: If your vehicle is special purpose or has additional fittings please add this request when you complete the online quote form. You will then receive a quotation specific to your vehicle and your usage.

Top of Page