Polyair Springs are designed and engineered for long life. Provided you take a little amount of care when selecting and fitting your kit, maximum results will be obtained.

Tips for Polyair Leaf Springs:

• Stands or Jacks should be placed under differential housing so that dimensional relationship between vehicle chassis and leaf springs remains unaffected.
• A correctly attached chassis bracket has no stress on the attaching screws.
• Kits are to be fitted not more than 40mm and not less than 20mm in front of or behind the differentials housing and usually fitting instructions specify the correct location.
• Clearance from any obstructions should be a MINIMUM of 20mm (exhaust pipes 60mm at all times.

Tips for Polyair Coil Springs:

• Most bags can be fitted between the lowest coil opening when the suspension is fully extended. Additional clearance between the coil may be obtained by removing lower shock absorber mountings and lowering suspension 30-50mm
• Bag should be a reasonable snug fit in the coil, however tolerance of + 6mm is common.
• CAUTION: Observe tension on brake hose, DO NOT STRAIN
• Ensure that exhaust tail pipe is 60mm from Polyair Bag. If necessary loosen clamps and rotate or move to obtain additional clearance.

Click here to take advantage of this Special Offer 20% OFF all Polyair Springs and Suspension

ABOUT
About SSA
Company Profile
Showroom
Workshop - Brisbane Springs
Manufacturing
Custom Built Springs
Warehouse
Home

PRODUCTS
Suspension Parts
2wd Suspension - Catalogue
4wd Suspension - Catalogue
4x4 Before & After Gallery
Truck & Semi Suspension
Catalogues - 2wd - 4wd
Sachs Shock Absorbers
Tips on Polyair Springs & Suspension

SSA
Special Offers - Cancelled Orders
Online Offer - 20% Discount
Express Quote - reply within 24 hour
Polyair Springs
BLUEMAX Distributors
BLUEMAX Warranty
Testimonials
Contact Us
Home

Suspension Supplies Australia
219 Toombul Road
Northgate Queensland 4013 - Australia
Phone 1800 630 411